The Loneliness of the Home Guzzi Mechanic

After my trip to Tocumwal Aviation Museum, I was sitting on my shed stool checking the Breva’s engine oil when my eyes passed over the tank to the steering stem where I noticed a brake line chaffing against a sharp steel edge. As I moved the handlebars, a right turn dragged the line across the corner of the steel block.

I removed the windscreen and headlight to gain access to the area.

The line was, in fact, the clutch hydraulic line. The steel had cut through the outer layer of the line. I couldn’t see any purpose for the steel protrusion, though one lower down on the stem worked as the left-right steering stop. Perhaps the upper one was a vestigial from a previous Guzzi model and now functionless.

This was my error. Some years ago I’d removed the headlight to replace the globe. In ignorance, I’d pushed the headlight binnacle back into place without considering the routing of the clutch line and electrical cables. It was now clear to me that the lines should be moved to the right (as facing the bike) and that the headlight binnacle shape would hold them in position, away from the steering stem.

That’s why I like doing my own servicing. I have the chance to look things over and understand the logic of it all. Sure, I make a few mistakes but that’s all part of learning.

1 Comment

Filed under Uncategorized

One response to “The Loneliness of the Home Guzzi Mechanic

  1. well spied Mackers. Mmm might yake the headlight off my Breva soon!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s