Breva 1100 Fuel Filter

As far as I can recall, the fuel filter was last changed a decade ago. I had Brad the Bike Boy change it when stories of the original plastic filter softening and bursting started appearing on the Guzzi forums. I had changed one before, in my wife’s Breva 750, so I had some idea of what to do.

I took the tank off and placed it upside down in a cardboard box, padded to prevent scratching. Undid screws and started to remove the pump.

The pump and filter came out without difficulty. Let it drain and took over to the bench to remove the filter.

Brad had used oetiker clamps when he’d installed the filter, which are definitely the best method. But I had obtained my new filter from Mario at Thunderbikes and he had supplied fuel hose clamps – oetiker clamps require special pliers to clamp them. The first oetiker clamp came off without drama but, as often is the way with the home mechanic, the second clamp put up more of a fight.

Noting the direction arrow on the filter, I fitted the new filter and clamps.

I inserted the fuel pump and filter back into the tank without drama and screwed it all back down, taking care to tighten the screws evenly. I went around the base several times, tightening each screw a little at a time to get it all uniformly seated.

The tank will be back on the bike in a few days time, after changing the oils and brake and clutch fluids.

2 Comments

Filed under Uncategorized

2 responses to “Breva 1100 Fuel Filter

  1. You are doing a big spring maintenance job there!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s